Port103V Development Board

รหัสสินค้า : P103VDB

Port103V is a STM32 development board that features a STM32F103VET6 device as the microcontroller, supports further expansion with various optional accessory boards for your specific application. It is ideal for starting application development with STM32F family.

Note: Optional accessory boards are NOT included in the price

1.STM32F103VET6: the high performance STM32 MCU which features 

 - Core: ARM Cortex-M3 32-bit RISC 

  - Operating Frequency: 72MHz, 1.25 DMIPS/MHz 

  - Operating Voltage: 2-3.6V 

 - Package: LQFP100 

  - I/Os: 80 

  - Memories: 512K Flash, 64K RAM (the highest specification in STM32F103V series) 

  - Communication Interfaces: 3xSPI, 5xUSART, 2xI2S, 2xI2C, 1xFSMC, 1xLCD, 1xSDIO, 1xUSB, 1xCAN 

 - AD & DA converters: 3xAD(12bit, 1μs, shares 16 channels); 2xDA(12bit) 

  - Debugging/Programming: supports JTAG/SWD (serial wire debug) interfaces, supports IAP

2.AMS1117-3.3V: 3.3V voltage regulator

3.Power indicator

4.LEDs: Convenient for indicating I/O status or program debugging running state

5.Reset button

6.User keys

7.Joystick: five positions

8.8M crystal oscillator: enables the MCU run at 72M frequency by frequency multiplication

9.32.768K crystal, used for internal RTC, also supports clock calibration

10.JTAG/SWD interface: for debugging/programming

11.USB connector, used for establishing USB communication between PC and the STM32 development board

12.USART1 connector, supports ISP (In-System Programming) through USART1, as well as system signal output

13.IO expander, all the MCU pins are accessible on expansion connectors for further expansion

14.Power input/output header, 5V/3.3V, usually used for power output, or common ground with other user board

15.5V DC power jack

16.Boot mode selection: for configuring the BOOT0 and BOOT1 pins

17.Power supply switch, powered from 5V DC jack or USB connection

18.USB enable jumper 

 - Short the jumper to enable the PC auto detection while USB connecting 

  - Open the jumper to disable

19.VBAT selection jumper 

 - Short the jumper to use system power supply 

  - Open the jumper to connect the VBAT to external power, such as battery

20.VREF jumper 

 - Short the jumper to connect VREF+/VREF- respectively to VCC/GND 

 - Open the jumper to connect VREF+/VREF- to other custom pins via jumper wires

21.User LEDs jumper 

 - Short the jumper to connect to I/Os that used in example code 

  - Open the jumper to connect to other custom pins via jumper wires

22.User keys jumper 

 - Short the jumper to connect to I/Os that used in example code 

 - Open the jumper to connect to other custom pins via jumper wires

23.Joystick jumper 

 - Short the jumper to connect to I/Os that used in example code 

 - Open the jumper to connect to other custom pins via jumper wires

Note:

 - Accessory board and programmer/debugger in the photos are NOT included in the price.

 - Port103V supports programming through USART port without programmer.

 - Port103V provides JTAG/SWD debugging interface, yet does NOT integrate any debugging function, a debugger is required.

Package Contains

 - Port103V Development Board x 1

 - USB type A to Mini-B cable x 1

 - USB Power Cable x 1

 - 4-pin wire x 2

 - 2-pin wire x 2

 - User Guide CD x 1