Micro Metal Gearmotor 250:1

รหัสสินค้า : MMG250-1

This gearmotor is a miniature (0.94" x 0.39" x 0.47"), high-quality, low-current motor with 250:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft.Key specs at 6 V: 50 RPM and 30 mA free-run, 22 oz-in (1.6 kg-cm) and 0.36 A stall.

Overview

These tiny, high-quality motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range. Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. All of the micro metal gearmotors have the same physical dimensions, but they come in a wide range of gear ratios—from 5:1 up to 298:1—and let you choose between two different motors: high-power (HP) and standard. This means you can choose the version that has the ideal blend of speed, torque, and current-draw for your particular application. Please see the table at the bottom of this page for detailed specifications, or look at micro metal gearmotor comparison table.

Dimensions

   - Size:24 x 10 x 12 mm

   - Weight:0.34 oz

   - Shaft diameter:3 mm

General specifications

   - Gear ratio:250:1

   - Free-run speed @ 6V:50 rpm

   - Free-run current @ 6V:30 mA

   - Stall current @ 6V:360 mA

   - Stall torque @ 6V:22 oz·in

 Part No : ELE-WA361085488