HIH-4030 Humidity Sensor Breakout

รหัสสินค้า : HIH-4030HSB

This is a breakout board for Honeywells HIH-4030 humidity sensor. The HIH-4030 measures relative humidity (%RH) and delivers it as an analog output voltage. You can connect the output of the sensor directly to an ADC on a microcontroller; and, thanks to the sensors near linear voltage output, the data is very easy to process.

Voltage applied to the supply pins should be within 4-5.8VDC, and optimally at 5V. The sensor will typically only consume about 200μA.

This product comes as shown in the picture, with the HIH-4030 soldered onto the breakout board. The pins of the 3-pin header are spaced by 0.1".

Features:

•    - Near linear, analog output
•    - 4-5.8VDC voltage supply
•    - All pins broken out to a 0.1" pitch header
•    - Laser trimmed interchangeability
•    - Low power design, typical current draw of only 200μA
•    - Enhanced accuracy
•    - Fast response time
•    - Stable, low drift performance

Dimensions: 0.75 x 0.30 " (19.05 x 7.62 mm)