Bumper Switch (2-pack)

รหัสสินค้า : BS2-p

Kit includes a pair of simple bumper switches custom built for the VEX Robotics Design System. Ruggedized Bumpers allow the switch to be triggered by large impacts without sustaining damage.

 - Provide feedback to Microcontroller as events "happen".

 - Rugged bumpers allow switch to be triggered without damage.

 - Useful as a trigger in a variety of applications.

 - Functionality is pre-programmed in the VEX Microcontroller.

Bumper Switch Sensor: The bumper sensor is a physical switch. It tells the robot whether the bumper on the front of the sensor is being pushed in or not.

Switch Info: SPST switch (“Single Pole, Single Throw”) configured for Normally Open behavior.

Signal Behavior: When the switch is not being pushed in, the sensor maintains a digital HIGH signal on its sensor port. This High signal is coming from the Microcontroller. When an external force (like a collision or being pressed up against a wall) pushes the switch in, it changes its signal to a digital LOW until the switch is released. An unpressed switch is indistinguishable from an open port.

Technical Specifications

Kit Contents

 - (2)Bumper Switches

 - (4)8-32 3/8" Screws

 - (4)Keps Nuts

 - (1)Inventors Guide Insert

Compatibility

 - All VEX Microcontrollers.

 - 3-Wire Extension Cables.

Inputs

 - Type:Momentary

 - Trigger Force:5.06 oz typical

Function

 - Switch Type:SPST (single pole - single throw)

 - Switch Connection:Wired to normally open (OFF)

Outputs

 - 3-Wire Cable

   - Black:ground

   - Red:No Connect

   - White:control signal

Weight

 - Bumper Switch0.042 lbs (19.05 grams)

 - 8-32 3/8" Screw0.0026 lbs (1.19 grams)

 - Keps nut0.0029 lbs (1.32 grams)

 - Actual weight one one item (no packaging)