Arduino Pro 328 - 3.3V/8MHz

รหัสสินค้า : AP328-3.3V8MHz

come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. Its a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.

We wanted Arduino Pro to be low profile. The DC power jack footprint is available, but not populated. We recommend running the board with a LiPo battery for better portability.

We really wanted to minimize the cost of an Arduino. The Arduino Pro is like the Arduino Duemilanove (same pin out) but to keep the cost low, we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work.

Features:

 - ATmega328 running at 8MHz external resonator

 - Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, Accelerometers, sensors, etc)

 - USB connection off board

 - 3.3V regulator

 - Max 150mA output

 - Over current protected

 - Reverse polarity protected

 - DC input 3.3V up to 12V

 - Resettable fuse prevents damage to board in case of short

 - Power select switch acts as on/off switch