12V/6.1Kg-cm/73RPM 50:1 DC Gear Motor

รหัสสินค้า : 12V6.1Kg-cm73RPM50-1GM

The 3260 is a 12 volt gear motor, generating 6.12 Kg-cm of torque at 73 RPM. While this motor is small and inexpensive, it is also aggressive- less efficient than the others, but very powerful for its size.

This family of motors (3258, 3259, 3260) have the same gearbox type and mounting metrics as the (3254, 3255, 3256, 3257) family of motors.

Product Features

 - Good Torque, Low Cost

 - Motor Length (including Gearbox): 86mm

 - Shaft Diameter: 6mm

 - 50:1 Gear Reduction

 - Rated speed: 73RPM

 - Rated Torque: 6.12 Kg-cm

Motor Specifications at Peak Efficiency

 - Rated Current 2A 

 - Output Torque 6.12 Kg-cm 

 - Output Power 7W 

 - Rated Speed 73RPM 

Other Specifications

 - Rated Voltage 12VDC 

 - Stall Current 5A 

 - Torque Produced When Stalled 70.4 Kg-cm 

Physical Properties

 - Motor Length (including gearbox) 86mm 

 - Shaft Diameter 6mm 

 - Weight 284g 

Gearbox Specifications

 - Gearbox Type Spur 

 - Gear Reduction 50:1 

 - Number of gear trains 4 

 - Maximum Strength of Gears 12 Kg-cm 

 - Maximum Shaft Overhung Load 35N 

 - Maximum Shaft Thrust Load 25N 

Motor Controller and Connection

The 3260 DC motor connects to either of the following controllers:

 - 1064 - PhidgetMotorControl HC

 - 1065 - PhidgetMotorControl 1-Motor

You'll need to solder wires to the contacts of the motor in order to connect it to a controller.

Warnings

The torque this motor produces when it stalls exceeds the rated strength of the gearbox. This means that stalling or very heavily loading this motor can cause serious damage to the gearbox. To avoid damage, avoid sudden loads or any load higher than the Maximum Strength of Gears spec.