12V/6.1Kg-cm/73RPM 50:1 DC Gear Motor w/ Encoder

รหัสสินค้า : 12V6.1Kg-cm73RPM50-1DCGMwE

The 3260E is a 12 volt gear motor, generating 6.12 Kg-cm of torque at 73 RPM. While this motor is small and inexpensive, it is also aggressive- less efficient than the others, but very powerful for its size.

This motor comes equipped with an E4P US Digital Encoder, which keeps track of the motor's rotation, allowing you to control your motor precisely.

This family of motors (3258, 3259, 3260) have the same gearbox type and mounting metrics as the (3254, 3255, 3256, 3257) family of motors.

Product Features

 - Good Torque, Low Cost

 - US Digital E4P Encoder Attached

 - Motor Length (including Gearbox and Encoder): 89.1mm

 - Shaft Diameter: 6mm

 - 50:1 Gear Reduction

 - Rated speed: 73RPM

 - Rated Torque: 6.12 Kg-cm

Motor Specifications at Peak Efficiency

 - Rated Current 2A 

 - Output Torque 6.12 Kg-cm 

 - Output Power 7W 

 - Rated Speed 73RPM 

Encoder Specifications

 - Connector Type E4P 

 - Counts Per Revolution 360 

 - Bore Diameter 3.175 

Other Specifications

 - Rated Voltage 12VDC 

 - Stall Current 5A 

 - Torque Produced When Stalled 70.4 Kg-cm 

Physical Properties

 - Motor Length (incl. gearbox and encoder) 89.1mm 

 - Shaft Diameter 6mm 

 - Weight 287g 

Gearbox Specifications

 - Gearbox Type Spur 

 - Gear Reduction 50:1 

 - Number of gear trains 4 

 - Maximum Strength of Gears 12 Kg-cm 

 - Maximum Shaft Overhung Load 35N 

 - Maximum Shaft Thrust Load 25N 

Motor Controller and Connection

The 3260E DC motor connects to either of the following controllers:

 - 1064 - PhidgetMotorControl HC

 - 1065 - PhidgetMotorControl 1-Motor

If you decide to use the 1065, you can connect the encoder directly into its encoder input. If you decide to use the 1064, you'll also need one of the following devices to read your encoder:

 - 1047 - PhidgetEncoder HighSpeed 4-Input

 - 1057 - PhidgetEncoder HighSpeed

You'll need to solder wires to the contacts of the motor in order to connect it to a controller.

Comes packaged with:

 - 3032 – E4P Encoder Cable

Warnings

The torque this motor produces when it stalls exceeds the rated strength of the gearbox. This means that stalling or very heavily loading this motor can cause serious damage to the gearbox. To avoid damage, avoid sudden loads or any load higher than the Maximum Strength of Gears spec.